HDPE Fusion Piping System Equipments

HDPE Fusion Piping System Equipments

How to Weld HDPE Tube ?  Butt Fusion, socket fusion, Saddle Fusion, or electrofusion, What is the difference for welding procedures?  Electrofusion – joins pipes and fittings  using special fittings that have a resistive wire built in, and that wire fuses the join. Voltage is applied  with an electrofusion processor, wich heats the wire, heating and melting the inside of the fitting and outside of the pipe wall. Butt Welding is that  Butt  or Fusion Welding uses a heating plate on the squared ends of the HDPE pipes to be joined. After the specified time, the heating plate is removed; pieces are put together and cooled under pressure.  Butt welding can be used to join 2 pipes or a pipe to a fitting. Socket Fusion uses custom shaped heating plates instead of a standard flat plate. More surface area of pipe is covered with this, which make the time to heat and fuse the pipe shorter. Usually refers to joining pipe to fitting instead of pipe to pipe. Need less pressure, less machinery, but is usually for pipes under 4’’. Sidewall or Saddle Fusion is similar to Socket Fusion, but is used to join a perpendicular fitting to the surface of a pipe. The fitting an pipe are then allowed to under pressure.

1.Suitable for Butt Fusion Welding of plastic pipes and fittings made of PE,PP, and PVDF in construction site or workshop.
2. consists of basic frame, heating plate, planing tool, and support (for planing tool & heating plate) and hydraulic unit                                                                                                                          
3. Removable PTFE coated heating plate with separate temperature control system.                                                        
4. Electric milling cutter with double cutting edge blades.  
5. Support for heating plate and planing tool.                                                                                   
6. Low starting pressure ensures reliable welding quality of small pipes.
7. It is made of lightweight and high strength material; simple structure and easy to operate
8. Hydraulic pump with controls, and quick release hoses. Includes countdown timers for heating and cooling phases.
9. High-accurate and shockproof pressure meter indicates clearer reading.
10. Labor Saving and high efficient crane is available to lift planing tool and heating plate

Optional Parts:
* Aluminum or Steel stub end device for short flange
* Wheeled Trolley
* Electric Crane and Hoist
* Narrow Clamps
* Data Logger

The Machines You May Require

1. CNC Saddle Welding

2. CNC Butt Welding

3. Pipe Fusion tools