Automatic Saddle Welding

View :

<

>
CNC Saddle Welding Machine for Reducing Tee

Unit Price: 17000~27000USD
Brand: Yuda
Packaging: Plywood Cases
Supply Ability: 10sets/Month
Min. Order: 1 Set/Sets
Certificate: CE,ISO9001, SGS

CNC Saddle Welding Machine for Reducing Tee The conventional technique to join a saddle to the side of a pipe consists of simultaneously heating both the external surface of the pipe and the matching surface of the “saddle” type fitting with concave and convex shaped heating tools until both surfaces reach proper...

Contact Now
<

>
PE Saddle Fabrication Machines

Unit Price: 20000~35000USD
Brand: Yuda
Packaging: Plywood Cases
Supply Ability: 10sets/Month
Min. Order: 1 Set/Sets
Certificate: CE,ISO9001, SGS

PE Saddle Fabrication Machines Saddle (sidewall) fusion is used to install a branch outlet fitting to the top or side of a main pipe.Tapping tee fittings are usually installed on top of the main, and branch or service saddle fittings on the side of the main. After the butt fusion joint has cooled, the main pipe wall...

Contact Now
<

>
HDPE Pipe Saddle Fusion Welding Equipment

Unit Price: 20000~35000USD
Brand: Yuda
Packaging: Plywood Cases
Supply Ability: 10sets/Month
Min. Order: 1 Set/Sets
Certificate: CE,ISO9001, SGS

HDPE Pipe Saddle Fusion Welding Equipment In heat fusion joining, mating surfaces are prepared, simultaneously melted with a hot-plate heater, the heater is removed, and the melted surfaces are pressed together and held under pressure. As the molten materials cool, they mix and fuse into a permanent, monolithic joint....

Contact Now
<

>
Polyethylene Fitting Saddle Welding Machine

Unit Price: 17000~27000USD
Brand: Yuda
Packaging: Plywood Cases
Supply Ability: 10sets/Month
Min. Order: 1 Set/Sets
Certificate: CE,ISO9001, SGS

Polyethylene Fitting Saddle Welding Machine Saddle or sidewall fusion is used to join a saddle to the side of a pipe by heating the external surface of the pipe and the matching surface of the fitting. A tool/machine is used to insure proper heating, alignment and force control. This process can be conducted while...

Contact Now

 Home > Products > Workshop Fitting Machine > Automatic Saddle Welding

China Automatic Saddle Welding Suppliers

Saddle Welding procedure requires the use of a Saddle Fusion tool. This tool must be capable of holding and supporting the pipe, rounding the pipe for proper alignment between the pipe and fitting, holding the fitting, and applying and indicating the proper force during the heat fusion jointing process. The heating and fusing process must be performed with accuracy and efficiency, especially when fusing to a pressurized main pipe. Automatic Saddle Welding machines with CNC control system promise operator to follow the welding temperature, welding time and jointing pressure after choosing welding standard, pipe size and material. CNC HDPE reducing tee saddle Fusion Welding Machine, which is produced under a high technology with special design of Pipe Fusion Machines, has the principle of working on the logic of the hydraulic system. For high quality reducer and high accuracy and working efficiency, Wuxi Yuda MRH-A Automatic HDPE Fitting Reduing Tee Saddle Fusion Equipment is your best choose.

Email to this supplier