Inner Welding Seam Bead Remover

Bead Removers to remove the bead left by butt welding. Also known as de-beaders, these poly pipe installation tools remove the weld bead on the inside, or outside of the pipe. A run-around planing tool is used for removing the exterior HDPE pipe bead, and a different tool with a long pole is used for removing the interior HDPE pipe bead. Removing the bead will allow better flow through the pipeline and reduce friction. 

An hdpe internal debeader tool is used to remove the inner weld bead on the inside of a HDPE pipe. Unlike the outside debeader, the internal debeader has to reach up the length of pipe, sometimes up to 24 m. The hdpe pipe internal debeader overcomes this by using a drive handle and a cutter head to reach in and cut the weld bead from the HDPE pipe. The inside debeading tool is usually used when the pipeline will carry slurry or other heavy fluids, where the internal bead will cause extra friction and sediment to build up. The standard internal de-beader suits pipe diameters from 90 mm to 630 mm 

We have Pipe Tools such as plastic cutter, Socket Welding Machine, bead remover, Squeeze Off Tool and pipe scraper etc.  Inside our wide range of plastic pipe fusing equipment, you will find manual Butt Fusion Welding Machines, hydraulic hdpe pipe butt welding machine, data-logging poly pipe Butt Welder, and cnc polyethylene pipe welding eqipment for your piping engineering such as requirement or the complete supply and installation of a sewage or water transmission line.

1. Designed to remove the internal bead from a complete butt-fusion welded joint.
2. The blade cuts inside bead and the handle helps pull the tool around the pipe, cutting the bead away.
3. Internal Debeader covering a range from Ø 90 up to 630 mm
4. This Internal Debeader Pipe Tool is intuitive, Easy to use, Accurate, Versatile.
5. The usage to remove HDPE, PP, PP-R, PVDF internal bead.
6. Operation Type: Manual

- Internal Debeader Head 90 mm              SDR17-SDR26
- Internal Debeader Head 110 - 140 mm   SDR11-SDR26
- Internal Debeader Head 160 - 200 mm  SDR11-SDR26
- Internal Debeader Head 225 - 315 mm  SDR11-SDR26
- Internal Debeader Head 355 - 400 mm  SDR11-SDR26
- Internal Debeader Head 450 - 500 mm  SDR11-SDR26
- Internal Debeader Head 560 - 630 mm  SDR11-SDR41
Internal Debeader Heand can be ordered separately too.
Internal Debeader Connection Rod, Support Rings can be ordered separately,too

Plastic Pipe Cutter
If a pipe needs to be cut exactly, it is essential to have a cutting tool that is up to the job. Our range comprises state-of-the-art cutters that can cut many different pipe sizes and materials properly and quickly.
 

Squeeze Tool
hydraulic squeezer, very effective and useful in the worksite, to stop the gas or water flow in the HDPE pipelines